Sustainability

Art Metal Products is committed to becoming a sustainable company. 

Here are some ways where the company has demonstrated their commitment:

• We are proud to say that 100% of our products are painted with powder, rather than liquid.  Powder paint does not require any solvents when changing colors nor does it require filters, which both create a hazardous waste.  Powder paint contains no Volatile Organic Compounds, which when emitted may be harmful to humans and the environment. 
   
• Art Metal Products upgraded the lighting in all owned facilities, which includes offices, warehouses, and also factories.  The company changed to high-efficiency ballasts and bulbs with highly reflective housings.  Specifically, T-4, T-6, and T-8 bulbs were used.  Not only were the bulbs changed in our factory and offices in Deerfield Beach, FL, but also in our distribution centers in Apopka, and Memphis.
   
• A different chemical is used when applying the conversion coating.  Instead of using iron phosphate which requires heating of the concentration before application, Bonderite NT-1 is used.  This chemical does not require heat, ultimately saving energy costs because we are not burning gas to heat the water.
   
• Art Metal Products buys the majority of their steel from Nucor, a steel company that uses 75% recycled steel content to make their steel.  Nucor also uses Electric Arc Furnace Technology which has 67% less carbon equivalent emissions than from the conventional way of making steel from iron ore.  
   
• There are recycling bins taken up each week for paper as well as aluminum and plastics.
   
• Our materials are lead and chrome FREE.

LEED

Leadership in Energy and Environmental Design

The following is information gathered to help architects and designers figure out how many possible LEED points our products could contribute.  The information on this page was taken from the USGBC’s rating system LEED v4 For Schools New Construction and Major Renovations.

Materials and Resources
MR Credit 4: Recycled Content (1-2 points)
Art Metal Products buys most of their steel direct from the mill.  The steel bought is made up of 26.7% Post-Consumer Recycled Content and 22.1% Pre-Consumer Recycled Content.

MR Credit 5: Regional Materials (1-2 points)
Art Metal Products has their manufacturing facility located in Deerfield Beach, FL.  However, products are shipped to six Distribution Centers located across the country where they are stored and/or assembled.  Those locations are Carrollton TX, Munster IN, Memphis TN, Battleboro NC, and Apopka FL.

MR Credit 7: Certified Wood (1 point)
Art Metal Products have wood lockers available that are FSC (Forest Stewardship Council) Certified.    

Innovation in Design
ID Credit 1: Innovation in Design (1-4 points)
Path 1.  Innovation in Design 
Art Metal Products being Greenguard Children and Schools Certified could be a possible contributor to Innovation in Design if many of the other products going into the building are Greenguard Children and Schools Certified as well.